Power Line Construction Tools One Head Type Wire Rope Temporary Mesh Sock Joints

Conductor Mesh Socks Joint

Feature 1.As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on. It is also soft and easy to strench. 2.The most ideal tool for electric power construction. Applicatoin Hot sale cable pulling hoisting grip,cable sock is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley. Use Method First press the opening of the net sleeve with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the net sleeve is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the net sleeve. The net sleeve can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.

Conductor Socket Joints (Cable Socks Pulling Grips) are used to hold the overhead cables in transmission line stringing operation.There are single head type and Double heads type socket pulling grips. Single head type is used for connection of swivel joints and conductors, double heads type is used for connection of two section of conductors

MESH SOCKET JOINTS

Application: It is used to grip the ACSR conductors in line stringing operation, the product is specially braided from high strength galvanized steel wire. It could pass through the stringing blocks and tension wheel.

The Mesh Socket joints are made of high strength galvanized steel wire, braided in very soft ways and pressed with protection aluminum sleeve and copper sleeve. The sleeve could protect the conductor, and prevent the head of conductor to damage the Mesh Socket Joints.