The Conductor Stringing Blocks is a device specially used for laying out power cables. It is mainly used to lay out cable conductors to protect the cables from friction and improve construction efficiency. This equipment plays an important role in power construction, especially in places where the direction of the cable needs to be changed. By reducing the friction of the cable during the laying process, the cable is prevented from being damaged, thereby protecting the cable from wear.
First, the friction between the conductor and the spool car is an important factor affecting the use of the type of Conductor Stringing Blocks. During the tension release process, the friction between the conductor and the spool car may cause the conductor to wear, so corresponding measures need to be taken to reduce friction, such as sending a special person to look after the spool car at any time, stopping the spool car at any time to change the direction of the spool car or taking soft pads when friction is found.
Secondly, when the conductor changes the spool, the contact damage between the snake skin cover and the conductor is also a factor that cannot be ignored. When using the snake skin cover, it is necessary to check its quality, avoid using hard objects that are easy to scratch the conductor, and handle it gently when using it to reduce damage to the conductor.
In addition, the friction between the conductor and the spanning object in the release gear during the release process is also an important factor. Before the tension release construction, the tension of the wire must be calculated to ensure the distance between the spanning object and the spanning frame, and take measures such as lifting the conductor to avoid friction between the conductor and the spanning object.
Finally, the wear of the conductor over the tension tower due to the flipping of the traction plate is also a factor that needs to be considered. When the tension tower is raised, one or two pulleys need to be hung upside down on the ground according to the size of the turning angle to ensure stable conductor tension, prevent impact and reduce conductor wear.
As an Experienced China Conductor Stringing Blocks manufacturer, Lingkai is always committed to providing customers with high quality products.
